Cavalli turbo designed this WRX and STI drop-in turbo in house from the ground up. They have applied their Patented Triplex Ceramic Ball Bearing Billet turbo technology to this Direct Replacement Drop-In Turbo. Their Stage 3 and Stage 4 WRX and STI turbos utilize a 3 inch compressor cover inlet. This may require some modifications to the up pipe bolt holes and/or turbo bracket to be able to clear the 3¨ intake pipe (they have tested it with the Perrin 3¨ inlet pipe) at the TGV. You may need to trim the outer TGV housing slightly. This is a tight fit for the intake pipe and the silicone will be pinched a little to fit. This is normal. They are packing a lot of power in a small space. They chose a 62mm inducer/62mm exducer for their Stage 3 application for enthusiasts who are looking for up to a 90% increase in power. It is recommend to use of 1000cc injectors for 91/93 octane and 1300cc for E85 applications. They utilize a Turbosmart wastegate actuator to help stabilize boost on this high boost application. They do not recommend large diameter aftermarket exhaust manifolds/headers as a diameter over 1.25" drastically reduces exhaust energy and will move the power band to a normally less than desirable range for a street driven car.
Nobody has reviewed this product yet! Want to be the first one?