ETS 7inch Intercooler Upgrade Kit BMW 135i N54 N55 2007-2012

Add to Wishlist


The ETS intercooler Kit Features

  • Full Intercooler Kit- Includes Intercooler, Charge Pipe, Couplers,Clamps
  • Replaces Restrictive Stock Piping
  • Max HP Gains of 21.05hp
  • Over 60deg Lower Temps
  • No Heat Soak after a Pull
  • Reduces Knock
  • Durable Stainless Steel Piping
  • 4 Ply Silicone Couplers
  • Breeze Premium T-Bolt Clamps
  • Works On Both N54 (Twin Turbo) or N55 (Single Turbo)
  • Requires trimming of bumper cover

    Note how the inlet and outlets are staggered. The inlet is at the top of the cooler and the outlet is at the bottom. This design will force the air to flow through the whole cooler, not just straight across as if both inlet and outlets were on the top.

    Analysis of Stock Intercooler
    Base Test on a stage 1 vehicle at 12psi shows good power, but a flat spot in the mid range power between 5000-5700rpm is likely due to the rapidly rising outlet temps of the inefficient stock intercooler. Based upon the 100deg mid pull temps, and the 125deg end of pull temp, there is definitely room for improvement over the stock intercooler.

    Analysis of ETS Intercooler
    Upon installation of the ETS Intercooler Kit, the car shows a 21.05hp increase and makes 361 peak hp. Outlet temps are only 59deg at mid pull and the temps only rise to 66deg at the end of the run. These temps are significantly lower than stock, and it is no surprise that there is a substancial power increase with the intercooler kit installed. Aside from the midrange, we also noticed a slight Increase in top end power as well. This can be attributed in part to the ETS Replacement Charge Pipe which replaces the plastic stock pipe with the 2 restrictive dimples that protrude into the flow area of the pipe.


Nobody has reviewed this product yet! Want to be the first one?

Review This Product

You're reviewing: ETS 7inch Intercooler Upgrade Kit BMW 135i N54 N55 2007-2012