GSC Stroker R2 Camshafts Billet Mitsubishi EVO 8

$599.25
MPN
7008R2
Manufacturer
GSC Power Division
Add to Wishlist

Description

The 2.2-2.4L lower reving engines a profile that would allow for more air volume in the cylinder to help fill the larger displacement engines and make more midrange and top end power. The 7008R2 is a high lift very aggressive profile with a short overall duration to keep a lower usable rpm band. The 7008R2 is designed to rev between 4000-8500 rpms and should be used with a stroked engine or added displacement engine. The peak lift of 12.0MM Intake and exhaust will require upgraded valve springs and a titanium retainer with special attention to seal to retainer clearance. With the lift of this profile it is suggested to only use the 5041/5040 Ti retainer and spring kits do to valve seal to retainer clearance. The 5041 can be used to 40+psi and the 5040 to 32psi on the R2 profile at 8500rpms without float or flutter issues. The profile will work fine on the OEM Rocker Arm and the Zero-tick lifter or with the OEM lifter. We have seen gains of 25-30whp over the S2 profile on the stroked applications with much more possible when used with a ported head and aftermarket intake manifold. . 

**If using aftermarket cam gears(especially AEM) check the bolt lenght, some cam gears are too thick for the OEM bolt on the Billet cams, a 40mm underhead lenght bolt may be necessary in this case**

Billet R2 Specs .

 
7008R2 ADV Duration Duration @ 1mm Peak Lift CenterLine
Intake 274 236 12.0mm 109
Exhaust 274 236 12.0mm 115

Reviews

Nobody has reviewed this product yet! Want to be the first one?

Review This Product

You're reviewing: GSC Stroker R2 Camshafts Billet Mitsubishi EVO 8