Perrin 25mm Front Swaybar Subaru WRX / STI 2002-2007

Add to Wishlist


25mm (1in") diameters Perrin front swaybars give you more control of your car control. With two sizes and multiple attachment points for fine tuning the Perrin 25mm front swaybars make an excellent compliment to the WRX and STi's excellent handling characteristics. Perrin front swaybars are made from mandrel bent 4130 steel and then powdercoated to provide years of fun.

Perrin front swaybar kits include polyurethane pocketed bushings to reduce re-greasing and all the necessary hardware for a clean, and (relatively) simple installation.

Part Number: PSP-SUS-101


1 customer has reviewed this product.

great addition to the suspension

, Feb 19, 2010
this sway bar changed the handling of my car dramatically. the installation is a piece of cake IF you have the car up on ramps. Be generous with the greasing of the bushings and mounts. I am also using Kartboy endlinks with this sway bar and if you are doing the same, make sure you add washers to prevent the endlink bushings from popping out. With this sway bar, the front end will lean/roll dramatically less than with the stock sway bar, I am tremendously more confident when going into turns now. Do be careful though as at the limit, the car will understeer and at the limit, its not easy to control the understeer. Nonetheless, an awesome piece of suspension. FYI, I am also running STBs front and back and rear sway bar, that it; looking for a mild improvement in handling. Josh also offered great customer service, the packaging was protective as you would expect and because he gave me quotes not realizing I was in Hawaii, he sold them to me at the initial quote anyway, a true stand up guy and salesman. His policy of meeting and beating a competitor's price is 100% true.

Review This Product

You're reviewing: Perrin 25mm Front Swaybar Subaru WRX / STI 2002-2007