Cusco 26mm Front Sway Bar Subaru WRX 2022-2025 | 6A9 311 A26

I can confirm that if you have a Fumoto valve it will need to be removed and you will need to raise the engine about 1/4 of an inch to get clearance for the new sway bar. It really wasn't as bad as I thought it might be. Just loosen two of the engine mount bolts put a floor jack under the oil pan with a block of wood and raise it just a little bit. Definite improvement in handling. I had neutral steering with just the 21mm rear bar so this does introduce a little bit of understeer. The understeer can be overcome with a bit of throttle. I may end up putting in a bigger, adjustable bar in the rear.

Well made Cusco part. A definite upgrade from stock.

This Cusco bar is awesome. Fit and finish are perfect. Reduces body roll with no added NVH, great upgrade for track seat time or spirited driving. Be aware, the install does require raising the motor. Fumoto valve will interfere and require the oil be drained if your car is fitted with one. Best to have a shop install if you’re not comfortable doing this.