Perfect for heatsoak issues
100% recommended for anyone looking to get the heat out of the engine compartment. I'm in Florida and these vents made a huge difference in my intake temps and the overall drivability in our summer heat.
Regular Price: $149.99 - Instant discount: $20.03 = $129.96
🎅 Get 10% Cashback on ALL Noble products!
⛄ Cashback Amount: Starts at $12.90
The exact amount depends on the selected variant price.
⛄ After purchase, you'll receive an email with a code!
Fitment Information
2015-2021 Subaru WRX
2015-2021 Subaru STI
Key Features
To truly recreate the S209 look, you're going to need some fender vents. These ABS vents are OE quality and install in the best manner possible. 3M + clip in.
Works great with the various fender shrouds on the market.
There are two versions and the only difference is the mounting template. The method of installation allows for slightly rough cuts to be covered by the new trim piece. Just like you may have seen with aftermarket S209 rear bumper cooling vents.
NOTE: These can be used in different applications as long as the mounting surface is flat.
Installation
Use the template to map out where you want to place your fender vent. You will need to use painter's tape, a marker, and a saw to cut the sheet metal. Be sure to paint the metal afterwards to prevent rust.
Make sure the area is cleaned and prepped before installing the inner side of the fender vent. The outer portion then clicks over this.
Remember that ideal bonding temperature is 75-85 degrees and it takes 24 hours for a good bond and 72 hours for a 100 percent bond. Best to do this in relatively mid to low level humidity.
Warranty
1 year warranty against manufacturer defects